Get free delivery for orders over £1,200. Terms apply
Aluminium Flush Casement Window (Style 4)
Our slim line windows have been priced to suit all budgets and designed to resonate with all tastes.
• Internationally trusted locks, handles and hardware
• Strong, Secure, and durable
• Polyamide thermal break for increased thermal values up to: 1.4 W/m2K
• Slim Line Design
The standard hinge is the most common hinge used on our casement windows. The standard hinge is made from highly durable stainless steel and has been tested to class 2 (10,000 cycles). The standard hinge used on casement windows cannot be opened fully thus increasing safety.
Easy Clean Hinge
Easy Clean hinges are also made from highly durable stainless steel and have been tested to class 2 (10,000 Cycles). This hinge is most commonly used as a fire escape hinge as it allows to open the window up to a 90degree angle, in case of an emergency. The hinge allows the opening sash to move to the centre to allow easy cleaning of the glass – allowing you to clean both sides of the window.
- The Mila Hero handles are modern and stylish with a slimline design.
- Push to open, key lockable window handle
- Modern, uncluttered stylish design that compliments the rest of the hero range
- Rounded lever grip contoured for comfort
- Smooth-functioning ergonomic locking button
Normal glass, that is clear and durable. However, when it breaks it will break into large irregular shaped shards.
Stronger than standard glass. It is specially curated to increase strength and safety. When broken it shatters into smaller shards.
Strongest than both standard and toughened glass. Laminated glass has a laminated layer within the sealed unit which also helps prevent damages and increases security. The laminated layer makes it increasingly difficult to break into compared to standard and toughened.
Clear A Rated (Double-Glazed)
Clear A Rated (Triple Glazed)
Pilkington Active Solar Control Glass Grey Tint
Pilkington Active Solar Control Glass Bronze Tint
Pilkington Active Solar Control Glass Blue-Green Tint (Self Cleaning)
Pilkington Active Solar Control Neutral (Self Cleaning)
UPVC Solid Panel
Aluminium Solid Panel
What are trickle vents used for?
If this is for an extension, please read below;
All habitable rooms require 5000mm sq. of equivalent air.
If you have no other means of venting your room (i.e. a brick vent, mechanical ventilation or another window with a trickle vent fitted) then a trickle vent will need to be fitted to your window.
If this is for replacing an existing window, please read below;
If you are replacing an existing window and not changing the structural width of your opening then building regulations do not apply.
If the window you are replacing has trickle ventilation already fitted, then it is a requirement that a trickle vent is fitted on the replacement product.
You may choose to have a vent fitted regardless of if being a requirement, to aid background ventilation.
For all our aluminium windows, if you choose to have trickle vents it will be on an add-on bar (frame extension) which is 20mm high - to be added to the top of the window (this is included in the overall height of your window). On the 20mm frame extension, the trickle vent will then be cut out into it.
For all windows under 2000mm one trickle vent is fitted and for all doors over 2000mm two trickle vents are fitted.
90mm Sub Cill
The drainage sub cill is found at the bottom of the frame. It protrudes out to allow the water to drip away from the brickwork. When fitted in line with the back of the frame there is a visible overhang of 17mm (for doors) and 20mm (for windows).
150mm Sub Cill
The drainage sub cill is found at the bottom of the frame. It protrudes out to allow the water to drip away from the brickwork. 150mm Sub Cill is the most standard and common sub cill used. The standard size for a normal brickwork aperture is 150mm. When fitted in line with the back of the frame there is a visible overhang of 77mm (for doors) and 80mm (for windows).
180mm Sub Cill
The drainage sub cill is found at the bottom of the frame. It protrudes out to allow the water to drip away from the brickwork. When fitted in line with the back of the frame there is a visible overhang of 107mm (for doors) and 110mm (for windows).
230mm Sub Cill
The drainage sub cill is found at the bottom of the frame. It protrudes out to allow the water to drip away from the brickwork. When fitted in line with the back of the frame there is a visible overhang of 157mm (for doors) and 160mm (for windows).